« previous next »
Pages: 1 [2]   Go Down

Author Topic: List CD write speeds or burning a CD properly  (Read 2967 times)

mobrien_12

  • VIP
  • Member
  • ***
  • Posts: 2,138
  • Kudos: 711
    • http://www.geocities.com/mobrien_12
Re: List CD write speeds or burning a CD properly
« Reply #15 on: 24 May 2006, 01:57 »
Quote from: H_TeXMeX_H
Well it don't work ... the writer drive is hdd and I put hdd=scsi in the kernel line, and hdd dissapeared, but /dev/scd0 did not appear :(



hmm... ok.  

Check to see if the ide-scsi kernel module is loaded.  Maybe it is not loading automatically.

/sbin/lsmod |grep "ide-scsi"

if not,

modprobe ide-scsi

If that brings up /dev/scd0  and it solves your burning problems, then we just need to make it autoload.

You can also check the status of the scsi system by ls /proc/scsi
Logged
In brightest day, in darkest night, no evil shall escape my sight....

H_TeXMeX_H

  • Member
  • **
  • Posts: 1,988
  • Kudos: 494
    • http://draconishinobi.50webs.com/
Re: List CD write speeds or burning a CD properly
« Reply #16 on: 24 May 2006, 20:04 »
Hmmm ... it partly works (/dev/scd0 appears), but I get a hard system crash while trying to burn anything like that. Well I suppose it doesn't matter, burning at 4x is not that bad.
Logged

mobrien_12

  • VIP
  • Member
  • ***
  • Posts: 2,138
  • Kudos: 711
    • http://www.geocities.com/mobrien_12
Re: List CD write speeds or burning a CD properly
« Reply #17 on: 25 May 2006, 03:12 »
Something is very strange with that drive.
Logged
In brightest day, in darkest night, no evil shall escape my sight....

piratePenguin

  • VIP
  • Member
  • ***
  • Posts: 3,027
  • Kudos: 775
    • http://piratepenguin.is-a-geek.com/~declan/
Re: List CD write speeds or burning a CD properly
« Reply #18 on: 25 May 2006, 03:53 »
Quote from: mobrien_12
hdc=scsi
I believe it's hdc=ide-scsi

I didn't even know that until I noticed it written on my desk today (I really should get some post-it note things) - I used to need it ages ago, think I wrote it down when I gave Gentoo a try.
Logged
"What you share with the world is what it keeps of you."
 - Noah And The Whale: Give a little love



a poem by my computer, Macintosh Vigilante
Macintosh amends a damned around the requested typewriter. Macintosh urges a scarce design. Macintosh postulates an autobiography. Macintosh tolls the solo variant. Why does a winter audience delay macintosh? The maker tosses macintosh. Beneath female suffers a double scum. How will a rat cube the heavier cricket? Macintosh calls a method. Can macintosh nest opposite the headache? Macintosh ties the wrong fairy. When can macintosh stem the land gang? Female aborts underneath macintosh. Inside macintosh waffles female. Next to macintosh worries a well.

mobrien_12

  • VIP
  • Member
  • ***
  • Posts: 2,138
  • Kudos: 711
    • http://www.geocities.com/mobrien_12
Re: List CD write speeds or burning a CD properly
« Reply #19 on: 25 May 2006, 06:12 »
That's for LILO's append=
Logged
In brightest day, in darkest night, no evil shall escape my sight....

H_TeXMeX_H

  • Member
  • **
  • Posts: 1,988
  • Kudos: 494
    • http://draconishinobi.50webs.com/
Re: List CD write speeds or burning a CD properly
« Reply #20 on: 26 July 2006, 05:25 »
I found it, now I know how to burn a CD properly (I found it earlier, but today I got a chance to test it burning FreeSBIE), I used the ps command to find out how nautilus cd burner did it and used it myself.

Code: [Select]
cdrecord fs=16m speed=4 dev=/dev/hdd -dao driveropts=burnfree -v -data -nopad /path/file.iso
I wonder which one of the extra options did it, I don't see why there have to be so many just to burn a CD properly ... growisofs work great for DVDs with much simpler options
Logged

toadlife

  • Member
  • **
  • Posts: 730
  • Kudos: 376
    • http://toadlife.net
Re: List CD write speeds or burning a CD properly
« Reply #21 on: 26 July 2006, 09:09 »
Interesting to see that others have had this problem too. In FreeBSD, the cdrecord/mkisofs/etc have had problems in the past detecting the proper speeds of my DVD burner. I had to pass command line arguments to mkisofs via k3b's advanced settings to get burning to work properly.

Like linux, in FreeBSD ATAPI > SCSI emulation is required to burn CD's, only it's looks like it's much simpler to get working. You just load the 'cam' kernel module and go.
Logged
:)
Pages: 1 [2]   Go Up
« previous next »