Operating Systems > Linux and UNIX

Serial Port Modem is SLOW.. how can i fix?

(1/2) > >>

Calum:
my serial port modem is slow. it's on the desktop computer (it runs red hat 8.0). i have a laptop computer too (it runs mandrake 9.0), and it has a PC card modem. both connect to the same account at the same isp using the same telephone number. and both are 56k modems. the desktop serial port modem is connected normally on com1 or /dev/ttyS0. The PC card modem on the laptop i think is connected to an emulated com3, bt the mandrake installer put it automatically at /dev/modem and i have never checked to see where that points.

Now the serial port modem customarily seems to go at about 0.5kbps, peaking at 0.8kbps. This sucks compared to the PC card modem which goes at 4.2 kbps peaking at 5.2kbps.

I know this only from looking at the download speed while downloading rpm files while nothing else was using the connection, and also from the fact that webpages seem to load up a lot slower on the desktop than on the laptop.

Now what command line (or other) utilities can i use to determine some accurate speed ratings here, and then what can i do to make the serial port modem just as fast as the pc card modem. I really need to get a working modem on the desktop computer asap.

thanks in advance...

voidmain:
There are no physical restrictions that should cause it to be slower, in fact it *should* be faster because it should not be using your processor for functions that win/linmodems use. You might what to check the modem log and see what connection speed your modem got with your provider's modem.

You also might want to check your serial port settings (Baud_base speed etc) with the "setserial -a /dev/ttyS0" command (or whatever port your modem is on, in fact you should be able to just use /dev/modem since it should be a symlink to the port your modem uses). See "man setserial" for a multitude of options.

Other things could be the initialization strings, or bad cables, or some other incompatibility between your modem and your ISP's modem.

[ January 10, 2003: Message edited by: void main ]

Calum:
well, /dev/modem wasn't a symlink to start with, i installed red hat before i plugged the modem in, so i made the symlink myself with ln -s, also i am using redhat-control-network to connect and it has a built in GUI for baud rate, which is currently set to its highest setting (can't remember what that is), but i tried setting it down to 57000 or whatever the rate is for a 56k modem and it didn't help any... maybe i will try a different modem cable, although the one i am using is split new.

PS: what's an initialisation string and how do i find out more about it and how to set it. in particular, how would i go about fiddling with the initialisation strings to get the red hat one to be the same as the mandrake one?

and thanks for your speedy reply. you should get paid for the work you do on this site.

[ January 10, 2003: Message edited by: Calum ]

voidmain:
You really should try to set it at 115200 if possible although this can cause problems on some modems. What make/model is the modem? Does it have dip switches and are they correctly set? Have you tried turning off some of the error correcting protocols in the init string?

After having cable for the last couple of years I had forgotten how much fun modems can be.  

Calum:
it's a DYNALINK 56K V90 EXTERNAL MODEM (click for more info) and i don't think i would know a modem init string if it came and bit me on the ass! i'm not even 100% it has no dip switches. if they are physical objects then it has none. it has a smooth plastic case, weighs very little, and it only has a socket for the phone line (labelled 'data') and a socket for the power input and that's it. and it has all sorts of marvelous coloured lights on the front too.



here's a picture of the very modem in question...

[ January 10, 2003: Message edited by: Calum ]

Navigation

[0] Message Index

[#] Next page