Operating Systems > Linux and UNIX

My days with linux

<< < (2/4) > >>

udaki:
I changed the depth like u said to 32 and restarted xfree86 and it fucked up xfree86 any other ways to change the depth to 32?

WMD:
How did you change it? Did you change "Depth 16" to "Depth 32", or did you copy in the entire section?

insomnia:
Could you post your full /etc/X11/XF86Config file.

udaki:
here it is:

# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
   Identifier     "Default Layout"
   Screen      0  "Screen0" 0 0
   InputDevice    "Mouse0" "CorePointer"
   InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
   RgbPath      "/usr/X11R6/lib/X11/rgb"
   FontPath     "unix/:7100"
EndSection

Section "Module"
   Load  "dbe"
   Load  "extmod"
   Load  "fbdevhw"
   Load  "glx"
   Load  "record"
   Load  "freetype"
   Load  "type1"
   Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#   Option   "Xleds"      "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#   Option   "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#   Option   "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#   Option   "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#   Option   "XkbLayout"   "de"
# or:
#   Option   "XkbLayout"   "de"
#   Option   "XkbVariant"   "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#   Option   "XkbOptions"   "ctrl:swapcaps"
# Or if you just want both to be control, use:
#   Option   "XkbOptions"   "ctrl:nocaps"
#
   Identifier  "Keyboard0"
   Driver      "keyboard"
   Option       "XkbRules" "xfree86"
   Option       "XkbModel" "pc105"
   Option       "XkbLayout" "us"
EndSection

Section "InputDevice"
   Identifier  "Mouse0"
   Driver      "mouse"
   Option       "Protocol" "IMPS/2"
   Option       "Device" "/dev/input/mice"
   Option       "ZAxisMapping" "4 5"
   Option       "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
   Identifier  "DevInputMice"
   Driver      "mouse"
   Option       "Protocol" "IMPS/2"
   Option       "Device" "/dev/input/mice"
   Option       "ZAxisMapping" "4 5"
   Option       "Emulate3Buttons" "no"
EndSection

Section "Monitor"
   Identifier   "Monitor0"
   VendorName   "Monitor Vendor"
   ModelName    "Gateway EV700"
   DisplaySize  330   240
   HorizSync    31.0 - 69.0
   VertRefresh  50.0 - 110.0
   Option       "dpms"
EndSection

Section "Device"
   Identifier  "Videocard0"
   Driver      "i810"
   VendorName  "Videocard vendor"
   BoardName   "Intel 845"
   VideoRam    32768
EndSection

Section "Screen"
   Identifier "Screen0"
   Device     "Videocard0"
   Monitor    "Monitor0"
   DefaultDepth     24
   SubSection "Display"
      Depth     24
      Modes    "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

Section "DRI"
   Group        0
   Mode         0666
EndSection

WMD:
Replace your current file with this one:


--- Code: ---
--- End code ---

Navigation

[0] Message Index

[#] Next page

[*] Previous page