Operating Systems > Linux and UNIX

Lycoris install HELP!

(1/3) > >>

RudeCat7:
The checksum is o.k.

tried 2 different computers: 400mhz and 1.1ghz
tried 2 different iso burns
tried 2 different cd drives. 24x and a hp9100 burner

Lycoris hangs during the install @ 51%, 95%, 91%

What else should I check?
Note: I'm trying to install as a single OS. These are extra computers I have.  :confused:

KernelPanic:
I can't really help but, you could try a slow burn of the ISO (2x, $x) and see if that helps.

choasforages:
how stable are the machine normally, what kind of hardware is in them. any odd bios setting or something like that

RudeCat7:
I haven't used these machines much, but they should   be o.k.

I did check the bios as you suggested, nothing weird.

I am trying it again, and so far it's hanging @ 91%.

This machine is: Thunderbird 1.1ghz
                  MSI k7t turbo2
                  128mb sdram
                  13gig ibm hd
                  Voodoo 3000 agp
                  HP 9100 series burner

I may try the slow burn as a final resort, but if the checksum is o.k., then shouldn't it be 100% good?

Master of Reality:
if the checksum is correct then it should be burned properly.

Navigation

[0] Message Index

[#] Next page