Miscellaneous > The Lounge

AMD or Intel?

<< < (4/6) > >>

TruBSD:
Yeah, amd chips put out more heat, but they can also stand a lot more heat than intel chips. I got my watercooled 1600+(1400 default) runnin at 1617Mhz, on my KG7 with 512mb of shity samsung ddr(need some kingmax pc2700, then watch this sumbitch smoke anything when i hit 2ghz)I used to be an intel zealot(back in the k6 days when amd made some pretty weeeny chips)But now that i've got one of these bad boys, i'm quite happy with it.

magnuslee21:
how did you get the cooling system to work?
ive been thinking of setting one up but all i could think of was running bent tubing around the chip like a radiator and hooking it up to a compressor and running r-134 through the lines but the output isnt worth the effort unless you use lox or liquid nitro

amd athlon 1750 paired
fic m11 mainboard
1536 meg pny ddr ram
quantum fireball III 10000rpm 160 gig hd

beat that  :D

TruBSD:
I just used a radiator, a mag-drive pump, some silicon tubing, water, and water-wetter, and a waterblock that i got from Tom Leufkins. At one point after my first pump failed, i was running a 800gph(@6' lift) in there, made noise but my temps droped by 3 degrees! I eventually put a 450gph magdrive in there(much quiter) And i've been happy at 5 degrees above ambient(gonna get 2 220w pelts soon, -30c is looking like a good number    ) But anyway, the water is pumped from the res -> waterblock -> radiater -> back to the res. I'm also gonna try to get a dehumidifier, and modify it's coil to cool my radiator. This setup is a lot quiter, and much cooler than when i was going air-cooled(damn delta fan was driving me nuts!) You just have to be careful when you watercool, and hose clamps are your friend!

gump420:

quote:Originally posted by magnus lee:
slot type boards are better that socket type partially because of the chip layout itself

first   the stand-up slot type gets better airflow around the chip and through the heatsink than a socket type because you cant get air to the back of the chip in a socket

second   the standup slot type fans generally face into the airflow inside the case unlike socket type which trys to pull air cross-flow from the main air flow generally a difference of 5 to 10 mhz

amd athlon  1750 paired
fic m11 mainboard
1536 meg pny ddr ram
quantum fireball III 10000rpm  160 gig hd

beat that
--- End quote ---


What you say about the airflow is true; however, slot processors have one major drawback: bus speed between the processor/cache and the rest of the system. AFAIK, this is the reason AMD opted to switch back to a socket architecture.

MICROSOFT_RULES:
MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1MICROSOFT RULEZ!!!!!!!!!!!!!!!!!!!!!!!1V

Navigation

[0] Message Index

[#] Next page

[*] Previous page